Product ID:AMBERLITE IRA-94E WATER TREATMENT RESIN, 70368
MSDS Date:08/07/1990
FSC:6810
NIIN:00N056486
MSDS Number: BWGBH

ROHM AND HAAS CO

INDEPENDENCE MALL W
PHILADELPHIA, PA 19105
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

NON HAZARDOUS INGREDIENT; (WEAK BASE ANION EXHANGE POLYMER,

Fraction By Weight: 35-45%

OSHA PEL N/K

ACGIH TLV: N/K

34F,0C.

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 55-65%

OSHA PEL N/K

ACGIH TLV: N/K

PRACTICE PUBLISHED BY THE AMERICAN CONFERENCE OF

RTECS: 9999999ZZ

INSTALLATION, USE AND MAINTENANCE OF EXHAUST SYSTEMS.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT:MATERIAL CAN CAUSE EYE
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD . EYES:FLUSH WITH A LARGE AMOUNT OF WA
TER FOR AT LEAST 15 MINUTES. CONSULT A PHYSICIAN IF IRRITATION
PERSISTS.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATES TOXIC FUMES OF
NITROGEN OXIDES, CARBON OXIDES.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING INCLUDING SPLASH
GOGGLES AND RUBBER OVERSHOES. TRANSFER SPILLED MATL TO SUITABLE
CNTNRS FOR RECOVERY/DISP. CNTN SPILLS IMMED W/INERT MATLS (E.G.
SAND, EARTH). FLOOR MAY BE SLI PPERY; USE CARE TO AVOID FALLING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MIN RECOM STOR TEMP FOR MATL IS
0C/32F. MAX RECOM STOR TEMP FOR MATL IS 60C/140F. KEEP FROM
FREEZING; MATL STABILITY MAY BE AFFECTED.
Other Precautions:PROPERLY DESIGNED EQUIP IS VITAL IF THESE ION
EXCHANGE RESINS ARE TO BE USED IN CONJUNCTION W/STRONG OXIDIZING
AGENTS SUCH AS NITRIC ACID TO PVNT A RAPID BUILD-UP OF PRESS & POSS
EXPLO. CONSULT SOURCE KNOWLEDGEABLE IN HNDLG OF MATLS(SUPDAT)

Respiratory Protection:A NIOSH/MSHA APPRVD RESP PROT PROGRAM MEETING
OSHA 1910.134 & ANSI Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER
WORKPLACE CONDITIONS WARRANT A RESP USE. NONE REQUIRED UNDER NORMAL
OPERATING CONDITIONS .
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLICATN
OF MATL. REFER TO CURRENT EDITION OF INDUSTRIAL (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:SFTY GLASSES (ANSI Z87.1/APPRVD EQUIV).
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER WHICH
MEET ANSI DESIGN CRITERIA . PROTECTIVE CLOTHING & RUBBER OVERSHOES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:1.03-1.08 (H*2O=1). PH:7-11 AQUEOUS SLURRY. OTHER PREC:BEFORE
PRECEDING. DO NOT PACK COLUMN W/DRY ION EXCHANGE RESINS. DRY BEADS
EXPAND WHEN WETTED; THIS EXPANSION CAN CAUSE GLASS COLUMNS TO
SHATTER. VENT:VENTILATION:A MANUAL OF RECOMMENDED (ING 3)

Boiling Pt:B.P. Text:SEE ING 2
Melt/Freeze Pt:M.P/F.P Text:SEE ING 2
Vapor Pres:SEE ING 2
Vapor Density:SEE ING 2
Spec Gravity:SUPP DATA
pH:SUPDAT
Evaporation Rate & Reference:SEE INGREDIENT 2
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:BEADS.
Percent Volatiles by Volume:ING 2

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:TEMPERATURES >200C,>392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
MONOMER VAPORS, ALKYLAMINES, OXIDES OF NITROGEN.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL MET HOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.